Screw air compressor maintenance method?
Release time:
2024/05/22
1. Maintenance and replacement of air filter element
Under normal circumstances, 1500-2000 hours to replace the filter, if the air environment is dirty, you need to shorten the replacement interval.
2. Maintenance and replacement of lubricating oil
For the most commonly used oil-injected screw air compressors, there are three main functions of lubricating oil: lubrication, cooling, and sealing. The quality of the oil has a decisive influence on the performance of the oil-injected screw air compressor. A good oil has good oxidation stability, rapid separation, good foam cleaning, high viscosity, and good corrosion resistance. Therefore, it is recommended to use The original special screw oil.
3. Maintenance and replacement of oil filter
For the oil filter, the oil filter element should be replaced after the new machine runs for 300-500 hours. The second recommend is replaced after 2000 hours of use, and it is recommended to replace the new filter element every 1500-2000 hours.
4. Maintenance and replacement of oil and gas separator
Generally, when the pressure difference between the oil and gas separator before and after separation exceeds 0.12MPa, the filter element must be replaced, otherwise the motor will be overloaded and the oil and gas separator will be damaged and the oil will run. Extra service will not only save money, but will waste expensive electricity bills due to the larger current.
keywords
REAL-TIME NEWS
Contact
Telephone: +86-514-88926339
E-mail: bonorair@bndryer.com
Address: NO. 36, JinYuan Road, BaoYing County, YangZhou City, JiangSu Province, China
Copyright: Bonor Machinery Technology (Yangzhou) Co., Ltd.